联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
工业滑升门应用小知识
工业门：通常指用于厂房和其他工业建筑场合 ，供人员或车辆通行的大门 ，一般门扇面积和重量较大 ，性要求更高 。装置方法：门扇通过导轨向上运动的工业门的装置方法 。分节上翻式：直门扇通过导轨向上并有分段转向运动的工业门的装置方法 。笔直提升式：指门扇通过导航整体笔直向上运动的工业门的装置方法 。分层笔直提升式：若干块门扇前后叠放 ，通过导轨和传动系统使其分条理笔直上下运动的工业门的装置方法 。通例装置方法：指不需接纳特殊步伐 ，左右侧装置的横轨均为单根即能正常运行的分节上翻式工业门的装置方法 ，主要适用于门楣高度不小于600mm的洞口 。高位提升式：指门扇通过导轨笔直向上运行一段后再分段转向运动的分节上翻式工业门的装置方法 。顶置装置方法：扭簧平衡系统位于完全开启的门扇顶部的笔直提升式工业门的装置方法 。中置粱装置方法：扭簧平衡系统位于完全开启的门扇的部位的笔直提升式工业门的装置方法 。配重平衡方法：接纳配重方法来平衡门扇重量的笔直提升式工业门的装置方法 。推拉式：通过导轨和传动系统使门扇向左右偏向推拉的工业门的装置方法 。上承重式：指门扇重量由门扇顶部导轨来蒙受的推拉式工业门的装置方法 。下承重式：指门扇重量由门扇下部的地轨来蒙受的推拉式工业门的装置方法 。下承重电机牢固式：直开门机牢固位置的下承重式工业门的装置方法 。下承重电机随动式：指开门机装置在门扇上随门扇运动的下承重式工业门的装置方法 。推拉折叠式：指多快门板通过铰链连接、开启历程中相领门板逐步折叠起来的推拉式工业门的装置方法 。侧滑式：指借助于导轨 ，吊轮沿墙面作侧向滑移 ，并在一侧门垛处作转向运动的工业门的装置方法 。卷帘式：通过卷轴或卷筒转动发动帘片式门扇运动、从而实现门扇启闭的工业门的装置方法 。整板工业卷帘门：是有高强度彩涂钢板扎制成型的整板门扇、扭簧平衡系统和导正消音系统等组合而成的工业卷门 ，相对卷帘式车库门而言 ，一般门扇面积和重量较大 ，性要求更高 。双层帘片式工业卷门：指帘片式门扇是由铝合金型材或钢制型材 ，具内部填充隔声、保温质料制成的工业卷门 。2）、专用配件缓冲助推器：装置在导轨末端 ，实现门扇到位时的缓冲和启动时的助推功效的机构 。门中门（小门）：指在较大的工业门中 ，为便当人员通行在大门门扇中开设的小门 。采光窗：为增强室内光线而在门扇上开设的透明窗户 。平轮：指形状为柱型 ，适于通例装置方法和低空装置方法用的钢丝绳轮 。塔轮：指形状似塔型 ，适于笔直提升式工业门用的钢丝绳轮 。半塔轮：指形状一部分为柱型、一部分为塔型 ，适于高位提升式工业门用的钢丝绳轮 。联轴器：将的扭簧轴连接起来 ，实现同步转动的结构件 。钢丝绳断裂�；て鳎褐冈谏匣烂畔低持械母炙可狭咽� ，能迅速避免门扇向下滑行的�；ぷ爸� 。扭簧防断裂�；て鳎褐冈谏匣烂牌胶庀低持械呐せ啥狭咽� ，能迅速避免扭簧轴运动 ，实现组织门扇向下滑行的�；ぷ爸� 。
Industrial door:it usually refers to the door used in factories and other industrial buildings for the passage of personnel or vehicles.Generally,the door leaf area and weight are larger and the safety requirements are higher.Installation method:the installation method of industrial door whose door leaf moves upward through guide rail.Sectional upturning type:the installation method of industrial door with straight door leaf upward through guide rail and sectional steering movement.Vertical lifting type:refers to the installation mode of industrial door whose door leaf moves vertically upward through navigation.Layered vertical lifting type:the installation mode of industrial doors in which several door leaves are stacked back and forth and move vertically up and down in layers through guide rails and transmission system.Conventional installation method:it refers to the installation method of sectional upturned industrial door,which can operate normally without special measures,and the transverse rails installed on the left and right sides are single.It is mainly applicable to openings with a lintel height of no less than 600mm.High lift type:refers to the installation mode of sectional upturned industrial door in which the door leaf runs vertically upward through the guide rail for a period and then turns in sections.Overhead installation mode:the installation mode of vertical lifting industrial door with torsion spring balance system on the top of fully open door leaf.Installation method of central beam:the installation method of vertical lifting industrial door with torsion spring balance system located in the central part of fully open door leaf.Counterweight balance mode:the installation mode of vertical lifting industrial door that uses counterweight to balance the weight of door leaf.Push-pull type:the installation mode of industrial door that pushes and pulls the door leaf to the left and right through the guide rail and transmission system.Upper bearing type:refers to the installation method of push-pull industrial door whose weight is borne by the guide rail at the top of the door leaf.Lower bearing type:refers to the installation method of push-pull industrial door whose weight is borne by the ground rail at the lower part of the door leaf.Fixed type of lower load-bearing motor:the installation method of lower load-bearing industrial door at the fixed position of straight door opener.Lower load-bearing motor follow-up type:refers to the installation mode of lower load-bearing industrial door in which the door opener is installed on the door leaf and moves with the door leaf.Push-pull folding type:refers to the installation mode of push-pull industrial door in which multiple shutter plates are connected through hinges and the leading door plate is gradually folded during the opening process.Side sliding type:refers to the installation mode of industrial door with the help of guide rail,the lifting wheel slides laterally along the wall and makes steering movement at one side of the door stack.Rolling shutter type:the installation mode of industrial door that drives the movement of curtain leaf through the rotation of reel or drum,so as to realize the opening and closing of door leaf.Whole plate industrial rolling shutter door:it is an industrial rolling door composed of high-strength color coated steel plate,torsion spring balance system and positive silencing system.Compared with rolling shutter garage door,the general door leaf has larger area and weight and higher safety requirements.Double layer curtain type industrial rolling door:refers to the industrial rolling door whose curtain type door leaf is made of aluminum alloy profile or steel profile and is internally filled with sound insulation and thermal insulation materials.2).special accessory buffer booster:a mechanism installed at the end of the guide rail to realize the buffer function when the door leaf is in place and the boost function when starting.Door in door(small door):refers to the small door opened in the door leaf of the gate in order to facilitate the passage of personnel in the larger industrial door.Daylighting window:a transparent window opened on the door leaf to enhance indoor light.Flat wheel:refers to the steel wire rope wheel with column shape and suitable for conventional installation and low altitude installation.Tower pulley:refers to the steel wire rope pulley which is shaped like a tower and suitable for vertical lifting industrial doors.Half tower wheel:refers to the steel wire rope wheel whose shape is part of column type and part of tower type,which is suitable for high-level lifting industrial door.Coupling:a structural member that connects the torsion spring shaft to realize synchronous rotation.Wire rope breaking protector:refers to the safety protection device that can quickly prevent the door leaf from sliding downward when the wire rope in the upper sliding door system is broken.Torsion spring anti fracture Protector:refers to a safety protection device that can quickly prevent the movement of torsion spring shaft and organize the door leaf to slide downward when the torsion spring in the upper sliding door balance system is broken.
工业门：通常指用于厂房和其他工业建筑场合 ，供人员或车辆通行的大门 ，一般门扇面积和重量较大 ，性要求更高 。
Industrial door:it usually refers to the door used in factories and other industrial buildings for the passage of personnel or vehicles.Generally,the door leaf area and weight are larger and the safety requirements are higher.
装置方法：门扇通过导轨向上运动的工业门的装置方法 。
Installation method:the installation method of industrial door whose door leaf moves upward through guide rail.
分节上翻式：直门扇通过导轨向上并有分段转向运动的工业门的装置方法 。
Sectional upturning type:the installation method of industrial door with straight door leaf upward through guide rail and sectional steering movement.
笔直提升式：指门扇通过导航整体笔直向上运动的工业门的装置方法 。
Vertical lifting type:refers to the installation mode of industrial door whose door leaf moves vertically upward through navigation.
分层笔直提升式：若干块门扇前后叠放 ，通过导轨和传动系统使其分条理笔直上下运动的工业门的装置方法 。
Layered vertical lifting type:the installation mode of industrial doors in which several door leaves are stacked back and forth and move vertically up and down in layers through guide rails and transmission system.
通例装置方法：指不需接纳特殊步伐 ，左右侧装置的横轨均为单根即能正常运行的分节上翻式工业门的装置方法 ，主要适用于门楣高度不小于600mm的洞口 。
Conventional installation method:it refers to the installation method of sectional upturned industrial door,which can operate normally without special measures,and the transverse rails installed on the left and right sides are single.It is mainly applicable to openings with a lintel height of no less than 600mm.
高位提升式：指门扇通过导轨笔直向上运行一段后再分段转向运动的分节上翻式工业门的装置方法 。
High lift type:refers to the installation mode of sectional upturned industrial door in which the door leaf runs vertically upward through the guide rail for a period and then turns in sections.
顶置装置方法：扭簧平衡系统位于完全开启的门扇顶部的笔直提升式工业门的装置方法 。中置粱装置方法：扭簧平衡系统位于完全开启的门扇的部位的笔直提升式工业门的装置方法 。
Overhead installation mode:the installation mode of vertical lifting industrial door with torsion spring balance system on the top of fully open door leaf.Installation method of central beam:the installation method of vertical lifting industrial door with torsion spring balance system located in the central part of fully open door leaf.
配重平衡方法：接纳配重方法来平衡门扇重量的笔直提升式工业门的装置方法 。
Counterweight balance mode:the installation mode of vertical lifting industrial door that uses counterweight to balance the weight of door leaf.
推拉式：通过导轨和传动系统使门扇向左右偏向推拉的工业门的装置方法 。
Push-pull type:the installation mode of industrial door that pushes and pulls the door leaf to the left and right through the guide rail and transmission system.
上承重式：指门扇重量由门扇顶部导轨来蒙受的推拉式工业门的装置方法 。
Upper bearing type:refers to the installation method of push-pull industrial door whose weight is borne by the guide rail at the top of the door leaf.
下承重式：指门扇重量由门扇下部的地轨来蒙受的推拉式工业门的装置方法 。
Lower bearing type:refers to the installation method of push-pull industrial door whose weight is borne by the ground rail at the lower part of the door leaf.
下承重电机牢固式：直开门机牢固位置的下承重式工业门的装置方法 。
Fixed type of lower load-bearing motor:the installation method of lower load-bearing industrial door at the fixed position of straight door opener.
下承重电机随动式：指开门机装置在门扇上随门扇运动的下承重式工业门的装置方法 。
Lower load-bearing motor follow-up type:refers to the installation mode of lower load-bearing industrial door in which the door opener is installed on the door leaf and moves with the door leaf.
推拉折叠式：指多快门板通过铰链连接、开启历程中相领门板逐步折叠起来的推拉式工业门的装置方法 。
Push-pull folding type:refers to the installation mode of push-pull industrial door in which multiple shutter plates are connected through hinges and the leading door plate is gradually folded during the opening process.
侧滑式：指借助于导轨 ，吊轮沿墙面作侧向滑移 ，并在一侧门垛处作转向运动的工业门的装置方法 。
Side sliding type:refers to the installation mode of industrial door with the help of guide rail,the lifting wheel slides laterally along the wall and makes steering movement at one side of the door stack.
卷帘式：通过卷轴或卷筒转动发动帘片式门扇运动、从而实现门扇启闭的工业门的装置方法 。整板工业卷帘门：是有高强度彩涂钢板扎制成型的整板门扇、扭簧平衡系统和导正消音系统等组合而成的工业卷门 ，相对卷帘式车库门而言 ，一般门扇面积和重量较大 ，性要求更高 。双层帘片式工业卷门：指帘片式门扇是由铝合金型材或钢制型材 ，具内部填充隔声、保温质料制成的工业卷门 。
Rolling shutter type:the installation mode of industrial door that drives the movement of curtain leaf through the rotation of reel or drum,so as to realize the opening and closing of door leaf.Whole plate industrial rolling shutter door:it is an industrial rolling door composed of high-strength color coated steel plate,torsion spring balance system and positive silencing system.Compared with rolling shutter garage door,the general door leaf has larger area and weight and higher safety requirements.Double layer curtain type industrial rolling door:refers to the industrial rolling door whose curtain type door leaf is made of aluminum alloy profile or steel profile and is internally filled with sound insulation and thermal insulation materials.
2）、专用配件
2).special accessories
缓冲助推器：装置在导轨末端 ，实现门扇到位时的缓冲和启动时的助推功效的机构 。
Buffer booster:a mechanism installed at the end of the guide rail to realize the buffer function when the door leaf is in place and the boost function when starting.
门中门（小门）：指在较大的工业门中 ，为便当人员通行在大门门扇中开设的小门 。
Door in door(small door):refers to the small door opened in the door leaf of the gate in order to facilitate the passage of personnel in the larger industrial door.
采光窗：为增强室内光线而在门扇上开设的透明窗户 。
Daylighting window:a transparent window opened on the door leaf to enhance indoor light.
平轮：指形状为柱型 ，适于通例装置方法和低空装置方法用的钢丝绳轮 。
Flat wheel:refers to the steel wire rope wheel with column shape and suitable for conventional installation and low altitude installation.
塔轮：指形状似塔型 ，适于笔直提升式工业门用的钢丝绳轮 。
Tower pulley:refers to the steel wire rope pulley which is shaped like a tower and suitable for vertical lifting industrial doors.
半塔轮：指形状一部分为柱型、一部分为塔型 ，适于高位提升式工业门用的钢丝绳轮 。
Half tower wheel:refers to the steel wire rope wheel whose shape is part of column type and part of tower type,which is suitable for high-level lifting industrial door.
联轴器：将的扭簧轴连接起来 ，实现同步转动的结构件 。
Coupling:a structural member that connects the torsion spring shaft to realize synchronous rotation.
钢丝绳断裂�；て鳎褐冈谏匣烂畔低持械母炙可狭咽� ，能迅速避免门扇向下滑行的�；ぷ爸� 。
Wire rope breaking protector:refers to the safety protection device that can quickly prevent the door leaf from sliding downward when the wire rope in the upper sliding door system is broken.
扭簧防断裂�；て鳎褐冈谏匣烂牌胶庀低持械呐せ啥狭咽� ，能迅速避免扭簧轴运动 ，实现组织门扇向下滑行的�；ぷ爸� 。
Torsion spring anti fracture Protector:refers to a safety protection device that can quickly prevent the movement of torsion spring shaft and organize the door leaf to slide downward when the torsion spring in the upper sliding door balance system is broken.
下一篇：卷帘门电控箱的接线 上一篇：卷帘门泛起一下情况怎么解决？
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领 ，你学会了吗？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用 ，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料 。济南卷帘门接纳高强度铝合金质料 ，具备抗风、抗撞击和防盗特性 ，并配备...
