Jinan roller shutter door has been quite mature in domestic development, both enterprises and personal garages are widely used, fire prevention, anti-theft and other security measures are also very perfect. The market demand for roller shutter doors is also very large. When many consumers purchase roller shutter doors, they are measured by the manufacturer. After the measurement, they return to the factory for production. This undoubtedly adds a process and wastes a lot of time. Today, I will explain five points of attention for consumers' own measurement: 　

　1. 两边呈直角的墙。丈量人员应主动征求济南卷帘门客户意见，结果:一是客户选择左右保存线条，均匀美观，丈量人员可接纳减小目标尺寸120mm，即能抵达上述目标;二是客户选择的目标尺寸是稳定的，装置工人靠墙两边的直角线剪小，直到合适为止。 

　　1. Walls at right angles on both sides. The surveyors should take the initiative to ask the opinions of Jinan roller shutter door customers. The results are as follows: first, the customers choose to keep the lines left and right, which are even and beautiful. The surveyors can reduce the target size by 120mm, which can achieve the above goals; second, the target size chosen by the customers is unchanged, and the installers cut the right angle line on both sides of the wall until it is appropriate. 　　2. 上墙的直角。丈量时应主动征求济南卷帘门客户意见，是客户选择保存线条，统一美观，丈量时可接纳缩小(短)目标尺寸60mm，即能抵达上述目标;二是客户选择的目标尺寸是稳定的，装置工人直到切割线合适为止。 

　　2. Right angle to the wall. When measuring, we should take the initiative to ask the customer's opinion of Jinan roller shutter door. First, the customer chooses to keep the line, unified and beautiful. When measuring, we can reduce (short) the target size by 60mm, that is to say, we can achieve the above goal. Second, the target size chosen by the customer is unchanged, and the installation workers will not cut the line until it is appropriate. 

　　地板上。由于主顾的实际情况千差万别，一般分为三种:一种是已经铺好了地板，用丈量的要领可以丈量;第二类不铺设地板，高度应减小尺寸:A、地砖:大理石、瓷砖统一减小50mm;B、平铺木地板、复合地板、实木地板统一减少30mm;C、骨架木地板向骨架实际地板厚度增加10mm。

 　　On the floor. As the actual situation of customers varies greatly, they are generally divided into three types: the first one is that the floor has been laid, which can be measured by measuring method; the second one is not laying the floor, and the height should be reduced in size: A. floor tiles: marble and ceramic tiles are reduced by 50mm; B. tiled wood floor, composite floor and solid wood floor are reduced by 30mm; C. the thickness of the skeleton wood floor to the actual skeleton floor is increased by 10 mm. 　

　4. 左右壁面和顶壁面的笔直度和倾斜度。丈量者应谨慎选择zui点作为目标尺寸。 　

　4. Perpendicularity and inclination of left and right wall surfaces and top wall surfaces. The surveyor should carefully select the Zui point as the target size. 　　5. 简单的矩形。丈量员应主动征求客户的意见。结果如下:，主顾选择保存左右两边的线条，统一美观。只有当视察者和客户体现目标尺寸减少了60mm，才华实现保存线条的愿望。第二是客户选择目标尺寸稳定(客户要求门扇大一点)，一定要向客户说明用，并依直角墙框边线装小裁合适(效果是线左右差池称)。 　

　5. Single rectangle. The surveyor shall take the initiative to ask for the opinions of the customer. The results are as follows: first of all, customers choose to keep the lines on the left and right sides, unified and beautiful. The desire to retain the line can only be realized when the investigator and the customer say that the target size has been reduced by 60mm. The second is that the customer chooses the target size unchanged (the customer requires the door leaf to be larger), and must explain to the customer for use, and according to the right angle wall frame side line to fit small cuts (the effect is that the line is asymmetric left and right). 　

　以上就是对济南卷帘门装置前前期丈量对卷帘门装置的重要性的详细介绍，想要了解更多请点击官网 　

　The above is a detailed introduction to the importance of the front and early measurement of Jinan roller shutter device to the roller shutter device. For more information, please click