联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
�？鼐砹泵抛爸檬钡恼纷龇�
�？鼐砹泵抛爸檬庇心男┦虑槭且龊玫哪�？只有做正确的操作，注意正确的事项，才华顺利装置顺利使用 。对此，济南卷帘门厂家的相关人士是这样讲的：
What are the things to do when installing the remote control rolling shutter door? Only by doing the correct operation and paying attention to the correct matters, can the installation and use be smooth. In this regard, the relevant personnel of Jinan roller shutter door manufacturer said:
一、量需要的卷帘门尺寸：我们需要凭据自己的实际场合具体尺寸为准 �？梢酝ü匠呓姓闪� 。我们需要注意的是�？鼐砹泵诺母叨刃枰哂诿趴虻母叨�，因为这样在装置的时候越发便当，丈量好尺寸后就可以让卷帘门厂家定做合适的卷帘门 。
1、 The required size of roller shutter door: We need to be based on the specific size of our own actual site. It can be measured with a level ruler. What we need to pay attention to is that the height of the remote control roller shutter door needs to be higher than the height of the door frame, because it is more convenient to install. After measuring the size, the roller shutter door manufacturer can customize the appropriate roller shutter door.
二、检查电源是否正确：在�？鼐砹泵诺暮附忧�，要确定在通入�？鼐砹泵诺牡娜畹缭词欠穸颊�，这是包管卷帘门能够正常使用的要害性因素 。
2、 Check whether the power supply is correct: before welding the remote control rolling shutter door, make sure whether the three power supplies connected to the remote control rolling shutter door are correct, which is the key factor to ensure the normal use of the rolling shutter door.
三、焊接装置�？鼐砹泵牛航ㄗ龊玫囊？鼐砹泵庞胱岷附雍�，并将�？鼐砹泵庞朊趴蚶喂套爸�，需要注意的是，门洞口两侧地面要预留凹槽，经校正及格后，牢固木楔 。
3、 Welding and installation of remote control roller shutter door: weld the fixed remote control roller shutter door with the rotary shaft, and fix the remote control roller shutter door with the door frame. It should be noted that grooves should be reserved on the ground at both sides of the door opening, and the wooden wedges should be fixed after the calibration is qualified.
四、检查�？鼐砹泵牛壕砹泵抛爸煤煤�，我们需要仔细检查是否装置切合要求，尤其是卷帘门放下来的时候是否有卡顿或是不受控制这样的情形爆发，同时还需要注意的是，是否是将门洞关闭好没有漏洞 。
4、 Check the remote control roller shutter door: after the roller shutter door is installed, we need to carefully check whether the installation meets the requirements, especially whether the roller shutter door is stuck or out of control when it is put down. At the same time, we need to pay attention to whether the door opening is closed without gaps.
五、准备装置工具：�？鼐砹泵旁谧爸们拔颐切枰急负米爸镁砹泵诺墓ぞ�，梯子、钻头、螺丝刀、水平尺、电钻机等工具，将这些工具放在装置卷帘门便当拿到的位置，准备装置�？鼐砹泵� 。
5、 Preparation of installation tools: Before the installation of the remote control roller shutter door, we need to prepare the tools for installing the roller shutter door, such as ladders, drill bits, screwdrivers, level rules, electric drills, etc., and put these tools at the convenient positions for installing the roller shutter door. We are ready to install the remote control roller shutter door.
We explained the correct way to install the remote roller shutter door from five aspects. If you have any precautions, please visit our website at any time Ask about it!
下一篇：防火卷帘门运用期间的6点正确操作 上一篇：车库门使用故障预防步伐走三步
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领，你学会了吗？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料 。济南卷帘门接纳高强度铝合金质料，具备抗风、抗撞击和防盗特性，并配备...
