联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
卷帘门使用期间您要做些什么事
用过卷帘门的业主应该有这样一个疑问，就是用了一段时间后，为了避免泛起问题，需要在使用期间做些什么呢 ？今天让我们跟济南卷帘门厂家一起来讲讲。
The owner who has used the rolling shutter door should have a question, that is, after using it for a period of time, what should be done during the use to prevent problems? Today, let's talk with Jinan roller shutter door manufacturers.
1.使用清洁窗帘布时，很容易用硬币划伤外貌。当污渍太重时，可以使用清洗，牙膏和特制清洗。去污后，用清水擦拭，然后晾干。正确的清洁要领可以让铝合金卷帘门始终坚持明亮如新。
1. When using the cleaning curtain cloth, it is easy to scratch the surface with coins. When the stain is too heavy, you can use cleaning, toothpaste and special cleaning. After decontamination, wipe it with clean water and then dry it. The correct cleaning method can keep the aluminum alloy roller shutter door bright as new.
2.注意棱角不要擦太多，不然会造成棱角表皮脱落。
2. Be careful not to rub too much edges and corners, otherwise the edges and corners will fall off.
3.使用前，门体须经过事情人员的多面调试后才华操作
3. Before use, the door body must be debugged by professional staff before operation
4.当卷帘门在运行时，不允许有儿童或物品在门下，以免在运行历程中伤害儿童或物品。
4. When the rolling shutter door is in operation, children or objects are not allowed under the door to avoid injury to children or objects during operation.
5.操作时视察是否有异常噪音。如果有异常噪音，有须要通知人在维护进行保养
5. Observe whether there is abnormal noise during operation. If there is any abnormal noise, it is necessary to notify the professional person for maintenance
6.当电动机热�；ち卸�，应查明故障是否来自电动机或过载或�；ぷ爸谜ㄖ倒�，排除故障后方可投入运行。
6. When the thermal protection of the motor operates continuously, find out whether the fault is from the motor or overload or the setting value of the protection device is too low, and put it into operation after troubleshooting.
7.应确保电动机在运行历程中润滑良好。一般电动机械运行约5000小时，也就是说，它应该增补或更换润滑脂。当运行中发明轴承过热或损坏时，液压应实时更换润滑脂。使用更换润滑脂时，应旧润滑油，并用汽油清洗轴承和轴承盖的油槽，然后在轴承内外圈之间的空腔的1/2(2极)和2/3(4极、6极和8极)中加入ZL-3锂基润滑脂。
7. Ensure that the motor is well lubricated during operation. Generally, the electric machine runs for about 5000 hours, that is, it should replenish or replace the lubricating grease. If the bearing is overheated or damaged during operation, the hydraulic pressure shall be replaced with lubricating grease in time. When replacing lubricating grease, the old lubricating oil shall be removed, and the oil groove of the bearing and bearing cover shall be cleaned with gasoline, then ZL-3 lithium base grease shall be added to 1/2 (2-pole) and 2/3 (4-pole, 6-pole and 8-pole) of the cavity between the inner and outer rings of the bearing.
8.由于门体始终处于扭簧的张紧状态，如果您需要在修理，维护，事情，您需要联系来自的人员进行操作。
8. As the door body is always in the tension state of the torsion spring, if you need to repair, maintain and work, you need to contact professional personnel to operate.
Whether it is used at home or in many large places, such as industries and shopping malls, the role of rolling shutter doors is not a trivial matter. Come to our website if you don't know anything about it Consult!
下一篇：装置卷帘门一定要知道的事 上一篇：卷帘门的选择和使用要领的要点
阅读/ Recommended reading
- 济南卷帘门的优点剖析 2024-12-16
- 济南卷帘门的装置指南：办法与注意事项 2024-12-11
- 济南卷帘门的维修保养：延长使用寿命的要害 2024-12-09
- 济南卷帘门：卷帘门� ？仄魇Я槭笔允员疚牡囊彀桑� 2024-11-16
- 电动卷帘门的优势 2024-11-12
- 济南卷帘门：卷帘门� ？仄魇Я樵趺窗� ？ 2024-09-02
- 济南卷帘门厂：卷帘门卡主了怎么办 2024-08-28
- 济南电动卷帘门：电动卷闸门没电了怎么开? 2024-08-28
车库卷帘门故障及维修要领
2024-12-23
车库卷帘门在使用历程中可能会遇到种种故障，以下是一些常见的故障及其维修要领： Garage rolling shutter doors may encounter vario...
