联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
卷帘门厂家教你车库门� ？仄魅绾味月�
车库门在我们的日常生活中 ，车库门的� ？仄骱苌倩� ，有些只是丧失了密码 ，有些只是没电了。如果� ？仄鞫� ，那就没步伐了 ，所以 ，我们只能更换它。如果是丧失了密码 ，我们需要知道如何编码车库� ？仄�。下面济南卷帘门厂家为您讲讲。
Garage door in our daily life, the remote control of garage door rarely breaks, some just lose their passwords, and some just run out of power. If the remote control is lost, there is no way, so we can only replace it. If we lose our password, we need to know how to code the garage remote control. Now let's talk about Jinan roller shutter factory.
1.目前车库门� ？仄髦饕氤悼饷盼尴吡� ，一般接纳牢固编码或转动编码。由于每个的车库门� ？仄鞯谋嗦氩畋� ，获得它的比较简单要领是咨询制造商。但一般市场上车库门� ？仄鞯钠德饰�433.92mhz或315MHz。� ？仄饕话阌腥黾� ，但也有两个键;
1. At present, the garage door remote controller is mainly wirelessly connected with the garage door, and generally adopts fixed coding or rolling coding. Since the codes of garage door remote controllers of each brand are different, the relatively simple way to obtain them is to consult the manufacturer. However, the frequency of garage door remote control in the general market is 433.92mhz or 315MHz. The remote controller usually has three keys, but there are also two keys;
2.准备� ？仄鹘写肫ヅ� ，按下开门器的代码匹配键 ，该键通常在电机后面 ，按住1-2秒 ，指示灯变为常亮。按� ？仄靼醇� ，� ？仄魃系暮斓坪涂牌魃系暮斓仆绷� ，按2-4次(开门器的差别次数) ，两个红灯同时亮2-4次 ，即码匹配乐成;
2. First, prepare the remote control for code matching, press the code matching key of the door opener, which is usually behind the motor, press and hold for 1-2 seconds, and the indicator light will turn on. Press the button on the remote control, and the red light on the remote control and the red light on the door opener will be on at the same time. Press 2-4 times (different times of the door opener), and the two red lights will be on at the same time for 2-4 times, that is, the code matching is successful;
3.代码匹配历程完成后 ，指示灯应熄灭。如果此时码匹配指示灯一直亮着 ，则体现仍处于码匹配状态 ，很可能配备了其他� ？仄� ，导致将来自动开门关门造成不须要的损失。因此 ，代码匹配完成后 ，一定要按代码匹配键退出;
3. After the code matching process is completed, the indicator light should be off. If the code matching indicator is always on at this time, it means that it is still in the code matching state, and it is likely to be equipped with other remote controls, resulting in unnecessary losses caused by automatic door opening and closing in the future. Therefore, after the code matching is completed, be sure to press the code matching key to exit;
The above is the specific operation steps of garage door remote control coding. I hope it can help you. Of course, in daily life, we still need to maintain the garage door more, so that it can be used better and longer. For more information, please come to our website Pay attention.
下一篇：快速门的检查事项注意这些方面 上一篇：� ？鼐砹泵诺淖爸靡旒疤氐�
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁 ？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领 ，你学会了吗 ？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用 ，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料。济南卷帘门接纳高强度铝合金质料 ，具备抗风、抗撞击和防盗特性 ，并配备...
