联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
济南卷帘门如何布线设置？
近年来,随着社会的进步,电动卷帘门现在广泛使用,广泛用于工厂、社区和其他地方,在目今生活随处可见,卷帘门的线路是如何设置,和门行业来理解它。
In recent years, with the progress of society, electric roller shutter is now widely used, widely used in factories, communities and other places. It can be seen everywhere in the current life. How to set the circuit of roller shutter, and the door industry to understand it.
一、如何安排卷帘门的接线
1、 How to arrange the connection of rolling shutter door
1、如果您选择只需要�？� ，那么只需让电工在窗帘箱或窗帘装置面四周留下一个电位差并装置插座 ，但要注意这个电位差要求的箱子是“86型”的。
1. If you choose to only use remote control, you only need to let the electrician leave a potential difference near the curtain box or curtain installation surface and install the socket, but note that the box required by the potential difference is "86 type".
2、如果你选择既有�？仄饔钟惺侄刂泼姘� ，那就让电工在墙上开一个电位器 ，注意使用底箱的位置并引线一根三芯导线(单轨一根 ，双轨需要两根)。每个电动卷帘门轨道电机必须连接到一根三芯导线上 ，二轨电机零线不可共用。
2. If you choose to have both remote control and manual control panel, ask the electrician to open a potentiometer on the wall, pay attention to the position of the bottom box and lead a three-core wire (one for single track and two for double track). Each track motor of electric rolling shutter door must be connected to a three core conductor, and the zero line of two track motor cannot be shared.
如何给电动卷帘门装电线?
How to wire the electric roller shutter?
二、如何连接卷帘门电机控制线
2、 How to connect the roller shutter motor control line
1. 在需要装置的门框开口处画一条线。指出尺寸 ，然后让事情人员设计一个合适的电动门。这里重要的一点是 ，框架内的高度比门的高度稍高一些。
1. Draw a line at the opening of the door frame to be installed. Point out the size, then let the staff design a suitable electric door. The important point here is that the height of the frame is slightly higher than the height of the door.
2、先将百叶门框牢固 ，在这里将门框下部的牢固板取下;孔两侧地面预留沟槽 ，经校准及格后 ，将木楔、门框铁脚及预埋铁板牢固焊接牢固。水泥砂浆或强度不小于10MPa的细石混凝土嵌塞能牢固。
2. Fix the shutter door frame first, and take down the fixing plate at the lower part of the door frame here; reserve grooves on the ground at both sides of the hole, and fix and weld the wooden wedge, the iron foot of the door frame and the embedded iron plate firmly after the calibration is qualified. Cement mortar or fine aggregate concrete with strength not less than 10MPa can be firmly embedded.
3.装置电动门的主扇。一定要确保卷帘门与墙体形成一个整体 ，关闭性要做好 ，然后油漆孔和墙面。抹灰完成后 ，门缝应平整平整 ，翻开卷帘门应自由移动 ，不得有过紧、过松和回弹现象。
3. Install the main fan of the electric door. Make sure that the rolling shutter door and the wall form a whole, and the sealing shall be done well, and then paint holes and walls. After plastering, the door joint shall be flat and flat, and the rolling shutter door shall move freely without over tightening, over loosening and rebound.
以上是济南卷帘门公司关于电动卷帘门行业如何设置配线的一些介绍 ，但需要提醒的是 ，以上预留的位置是为了包管随时可以通电 ，如果您对我们的产品感兴趣 ，您可以打电话联系Z6尊龙官方网站官网入口。
The above is the introduction of Jinan roller shutter company on how to set up wiring in the electric roller shutter industry, but it should be reminded that the above reserved position is to ensure that the power can be connected at any time. If you are interested in our products, you can call us.
下一篇：变频器在卷帘门运行中的作用是什么 上一篇：济南卷帘门验收要注意哪些细节问题
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领 ，你学会了吗？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用 ，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料。济南卷帘门接纳高强度铝合金质料 ，具备抗风、抗撞击和防盗特性 ，并配备...
